Home › Products › MEMS Driver System › High-voltage, multi-channel, totally integrated MEMS Engine Driver System
High-voltage, multi-channel, totally integrated MEMS Engine Driver System
9070
- Output Voltage: 0 to 150 V
- Presice signal generation
- 4 channel amplifier with each channel individually programmable in frequency, amplitude and waveshape
- Sandia Labs Super uDriver software
- 1 year warranty
- Made in USA
A typical 9070 system consists of Sandia National Laboratory's Super µDriver® software, two 2414A-GS Waveform Generators, and one 2375 MEMS Driver Amplifier providing four flexible output channels. The channels may be operated in pairs using the built-in splitter or individually. The waveform generator may be programmed to output ideal MEMS drive signals, sine waves, square waves, or any arbitrary waveshape.
Amplifier gain is fixed at x15 and the signal amplitude is set at the waveform generator. All four channels are remotely programmed using IEEE-488.2 (GPIB) Waveforms and drive parameters for each channel may be created and downloaded using Sandia's Super µDriver® software. Contact TEGAM for more information on the 9070 or other customized MEMS driver solutions.