News on TEGAM

Blog News about TEGAM

AMS 2750F Pyrometry Instrumentation Solutions from TEGAM

TEGAM has reliable, accurate instrument solutions for the 0.1 degree temperature measurement resolution problem. The latest version of AMS2750 Pyrometry has just been released. Revision F is a complete rewrite so it pays to read it carefully to see how the changes may impact your operations. In the first paragraph, the standard states that, “Resolution requirements for recording…
Read more

AMS2750F Pyrometry Has Dropped

The latest version of AMS2750 Pyrometry has just been released. Revision F is a complete rewrite so it pays to read it carefully to see how the changes may impact your operations. This post will be focusing on instrumentation since that is what we know best at TEGAM. In the first paragraph, the standard states…
Read more

TEGAM’s 940A Thermocouple Temperature Calibrator Meets Two Navy SCAT Applications for New Requirement Contract

***US Navy Again Contracts with TEGAM, Inc.*** TEGAM’s 940A thermocouple temperature calibrator has recently been specified by the Navy to meet not one but two applications where Subcategory Code (SCAT) 4127 and 4128 are required. Previously, the Navy had specified separate thermocouple temperature calibrators to satisfy applications where SCAT 4127 and SCAT 4128 are required.…
Read more

TEGAM’s Jay Romanek Appointed as Atlanta Section Coordinator for NCSL International

TEGAM is delighted to announce the selection and appointment of our own DoD Program Specialist Jay Romanek as the Atlanta Section Coordinator for NCSL International. The volunteer role is essential for helping NCSL International members to meet and to exchange information with peers at least on a semi-annual basis, and Jay's organizational expertise will be helping…
Read more

TEGAM Announces Fast-Response Temperature Probe – When Time Is of the Essence!

***NEW PRODUCT ANNOUNCEMENT*** Geneva, Ohio --TEGAM, Inc., experts and innovators in temperature measurement, asked the question, “What does ‘Fast Response’ mean for a thermometer temperature probe?” We then answered that question with the arrival of our new, fast-response temperature probe for various industrial applications. As Dan Jackson - Thermometry products manager at TEGAM - explains…
Read more

TEGAM in the News – Microohmmeters, Intrinsically Safe Digital Thermometers, LCR Meters and Power Amplifiers Called-Out

      At TEGAM, we are always pleased when we get press exposure for our Temperature, Power, Humidity, Signal and other measurement instruments. Sometimes this comes in the form of product reviews on social media, sometimes it arrives as industry news coverage on the innovations we pack into our devices; sometimes it even concerns TEGAM itself…
Read more

What’s the Case for Rounded-Tip Pins for Kelvin Probes?

Introducing TEGAM BKP-J Tips for Kelvin Probes. When testing electrical bonds, maintaining the integrity of the surface can be critical. The tips of your probes have a lot to do with preserving that surface finish and integrity. TEGAM recognizes that specific applications may require specialized tools that allow the measurement without damaging the surface -…
Read more

TEGAM Announces Russell House, VP of Engineering

Russell House Accepts Position of Vice President of Engineering Role at TEGAM, Inc. GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a world-wide leader in the design and manufacture of test, measurement and calibration instrumentation, announces Russell House as the new Vice President of Engineering. As part of the TEGAM strategic growth plan, co-owners Andy Brush and Adam Fleder…
Read more

New PS-Cal RF Power Sensor Calibration Software Provides Automation & Confidence

Supports Over 250 Different RF Power Sensors GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., internationally recognized for its offering of RF power sensor calibration systems, recently released PS-Cal Calibration Software that allows fully automated RF power sensor calibration. PS-Cal is produced by Cal Lab Solutions of Aurora, Colorado. PS-Cal power sensor calibration software supports the widest range of…
Read more

U.S. Navy Has Selected TEGAM Model R1L-E2A for Aircraft and Ship Maintenance

Low-Resistance R1L-E2A is the only microohmmeter & bonding meter certified to ATEX, UL and CSA International Standards September 28, 2016 10:22 AM Eastern Daylight Time GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of test and measurement equipment, is proud to announce that the U.S. Navy has selected the TEGAM Model R1L-E2A Intrinsically Safe Portable Microohmmeter…
Read more

U.S. Navy Has Selected the TEGAM Model R1L-D1 Milli-Ohmmeter & RTD Meter for a Special Test Requirement of the Nuclear Navy

High-Accuracy Milli-Ohmmeter and RTD Meter Has the Longest Rechargeable Battery Life with a Rugged MIL-PRF-28800F Class 3 Rating   September 20, 2016 11:53 AM Eastern Daylight Time GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of electronic and digital test and measurement equipment, is proud to announce that the U.S. Navy has selected the TEGAM Model…
Read more

TEGAM Establishes a Traceability Path for a 9 kHz to 18 GHz RF Standard

Adam R. Fleder, President of TEGAM, spoke at the NCSL International Regional Meeting held on April 21, 2016 in the town of Pepperell, MA. As Tim Cooke from Cal-Tek reported in the Metrol'ogist® April 2016, "Adam detailed how TEGAM established a traceability path for a 9 kHz to 18 GHz RF standard (a range that…
Read more

TEGAM Releases Battery-Powered Microohmmeter

TEGAM, Inc. has expanded its line of microohmmeters with the development of the Model 1750/BAT. Based on the design of the highly successful Model 1750, this battery-powered microohmmeter version fills a need in the aerospace industry to replace the discontinued Keithley 580 for testing electrical and mechanical bonds. Aerospace industry professionals evaluated many alternatives and…
Read more