News

Data Collection Thermometer Giveaway at Food Safety Summit 2017

TEGAM to launch Data Collection Thermometers at Food Safety Summit 2017 TEGAM will be displaying their FSMA temperature solution at the 2017 Food Safety Summit.  This thermocouple thermometer features wireless technology and data collection.  This technology is accurate, cost effective and integrates into almost any existing compliance program.  The TEGAM 931A/932A thermometers will be available…
Read more

High Power RF Calibration System for Directional Power Sensors and Wattmeters

TEGAM’s New High Power Calibration System’s has unmatched accuracy due to an exclusive flow calorimeter designed to provide low uncertainties and convenient traceability. GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of innovative RF Power measurement instruments, recently released a High Power RF Calibration System that for directional power sensors and RF Wattmeters from virtually all…
Read more

TEGAM’s New 900 Series Bluetooth®Hand Held Thermometers Allow Managers to Remotely Monitor Critical Data Logs

HACCP and HARPC Data Collection Challenges Addressed by New Digital Thermometers GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of digital hand held thermometers for 30 years, is introducing a new series of industrial thermocouple thermometers to assist food manufacturers in meeting the requirements of the FSMA. “TEGAM constantly strives to provide current and potential customers…
Read more

U.S. Air Force Modernizes Laboratories with New TEGAM RF Power Standards

USAF increases cal lab capabilities and productivity while reducing support costs by implementing a simple calibrator upgrade GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of innovative RF power measurement technology, was recently awarded a contract with the U.S. Air Force to provide 48 TEGAM Model 2505A 6 kHz – 18 GHz RF Power Standards to…
Read more

U.S. Navy Has Selected the TEGAM Model R1L-E2A for Aircraft and Ship Maintenance

Low-Resistance R1L-E2A is the only bonding meter certified to ATEX, UL and CSA International Standards September 28, 2016 10:22 AM Eastern Daylight Time GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of test and measurement equipment, is proud to announce that the U.S. Navy has selected the TEGAM Model R1L-E2A Intrinsically Safe Portable Micro-Ohm and Bond…
Read more

New TEGAM Bluetooth® Hand Held Thermometers Aid Food Manufacturers in Preventing Foodborne Illness

New 900 Series Set New Performance Standards for Accuracy, Convenience and Wireless Ease of Use September 13, 2016 12:14 PM Eastern Daylight Time GENEVA, Ohio--(BUSINESS WIRE)--TEGAM, Inc., a leading supplier of digital hand held thermometers for 30 years, is introducing a new series of industrial thermocouple thermometers to aid food manufacturers in preventing foodborne illness.…
Read more

TEGAM Established a Traceability Path for a 9 kHz to 18 GHz RF Standard

Adam R. Fleder, President of TEGAM spoke at the NCSL International Regional Meeting held on April 21, 2016 in the town of Pepperell, MA.  As Tim Cooke from Cal-Tek reported in the Metrol'ogist® April 2016, "Adam detailed how TEGAM established a traceability path for a 9 kHz to 18 GHz RF standard (a range that…
Read more

techniCAL signs distribution deal with TEGAM

Hamilton ON-based techniCAL Systems 2002 Inc. has been appointed the Canadian distributor for Tegam Inc., Cleveland OH, manufacturers of a wide variety of test, measurement and calibration instruments. For the past 36 years, Tegam has enhanced its internal product development with the acquisition of product lines from a number of well-known companies such as Keithley…
Read more

TEGAM Releases New MET/CAL® Procedures for RF Power Sensor Calibration

FOR IMMEDIATE RELEASE Contact: Tina Newton 440-466-6100 tnewton@tegam.com Expands the capability of the widely used PMX Series calibration system while increasing the RF calibration workload of MET/CAL® TEGAM, Inc., the leading supplier of innovative RF power sensor calibrations systems , in a joint effort with Fluke Calibration, has produced a number of procedures for the…
Read more

2015 Trade Shows for TEGAM, Inc.

January 27-30, 2015 DesignCon Santa Clara CA Booth #305 March 29- April 1, 2015 Army Aviation Mission Solutions Summit Nashville, TN Booth #1016 July 19-23, 2015 NCSL International Workshop and Symposium Grapevine, TX Booth #310 To Be Determined: September 15-18, 2015 Process Expo Chicago, Illinois
Read more

TEGAM Introduces RF Power Sensor Calibration via MET/CAL®

TEGAM announces new RF Power Sensor Calibration procedures designed to operate on the Fluke Calibration MET/CAL software platform. Many calibration laboratories use MET/CAL to automate the calibration, data storage and asset tracking of their DC and Low Frequency workload.  These same features are now available for the valuable and complex process of RF power sensor…
Read more

Update: 3 Year Warranties on Most Popular Products

Due to our continuous quality improvements and confidence in our products, we have decided to begin offering a 3 year warranty instead of a 1 year warranty on our Most Popular products purchased on or after August 1, 2014: 3 year warranties on the following products: 110A Safety Volmeter, CAT III and Cat IV 122…
Read more

New Microohmmeter Probes are Rugged and Comfortable

FOR IMMEDIATE RELEASE Contact: Tina Newton 440-466-6100 tnewton@tegam.com TEGAM, Inc., a leading supplier of innovative microohmmeters, has just introduced five new Kelvin probes. When used with TEGAM's R1L bond meters or the 1740 or 1750 microohmeters, they enable engineers and technicians to more easily make four-wire bonding and other low-resistance measurements: The BKP-10 Kelvin probes…
Read more

New Catalogs have Arrived

I would like to thank you for your continued support of TEGAM! Our new catalogs have arrived!  You may view the pdf version at http://www.tegam.com/download-pdf.asp We have some exciting new products that I would like to draw your attention to.  On page 5, we have several new probes that are compatible with TEGAM R1L-B, R1L-BR,…
Read more

TEGAM Awarded Patent for Advanced Thermistor Design

FOR IMMEDIATE RELEASE CONTACT: Adam Fleder 440-466-6100 afleder@tegam.com New design promises higher accuracy at frequencies up to 70 GHZ, while at the same time making the sensors easier to build TEGAM, Inc., a leading supplier of innovative RF power measurements, was recently awarded Patent No. 8,558,556, “Planar-axial thermistor for bolometry.” This patent describes a novel…
Read more

TEGAM Patents Innovative Microwave Bolometer Design

FOR IMMEDIATE RELEASE CONTACT: Adam Fleder 440-466-6100 afleder@tegam.com New design promises higher accuracy at frequencies up to 70 GHZ, while at the same time making the sensors easier to build TEGAM, Inc., a leading supplier of innovative RF power measurements, was recently awarded Patent No. 8,610,069, “Coaxial to Dual Co-Planar Waveguide Launcher for Microwave Bolometry,”…
Read more

Tegam Revamps European Sales Channels

FOR IMMEDIATE RELEASE Contact:  Adam Fleder 440-466-6100 afleder@tegam.com TEGAM Revamps European Sales Channels Alliance with Amplifier Research  - will streamline sales and improve customer support TEGAM recently signed an agreement with AR Europe, a subsidiary of Amplifier Research (Souderton, PA), that will streamline sales and improve customer support in Europe. Now, TEGAM RF instrumentation, such…
Read more

TEGAM Introduces New ± 40 VDC Bias Adapter

Enables testing of batteries and polarized capacitors up to 40 VDC and 1 MHz GENEVA, OH – July 30, 2013 – The TEGAM Model  2191A  ± 40 VDC BIAS ADAPTER was designed to work with TEGAM’s 3525 and 3550 LCR meters to enable accurate testing of electrolytic, tantalum and other polarized capacitors.  The 2191A Adapter…
Read more

TEGAM To Host NCSLi Tutorial on Microwave Power Measurements

TEGAM’S Microwave Power Measurements Team will be presenting a tutorial at the NCSLi Conference in Nashville, TN. Accurate calibration of today’s diverse group of RF power sensors requires a thorough understanding of the underlying concepts and techniques.  Sensors are used in a wide range of applications involving both peak and continuous power measurements and manufacturers…
Read more

TEGAM Introduces New Video Showcasing The Model 1750 High Speed Microohmmeter

TEGAM'S Application Engineer, Amit Sabnis has produced a brief video demonstrating the key functions of the Model 1750 High Speed Microohmmeter. This video can be viewed at the following link, http://youtu.be/m0mrUqkGVC4. More product information can be found at, http://www.tegam.com/product.asp?modelNumber=1750. If you have any questions regarding this product, or video please contact Amit Sabnis at asabnis@tegam.com.
Read more

TEGAM Announces New Partnership with AEROTECS in the EU

TEGAM, Inc. is pleased to announce the addition of AEROTECS as its distributor for aerospace testing products in the European Union.  TEGAM’s line of bond meters is complemented by AEROTECS’ focused line of products and services solely for the aerospace market. According to AEROTECS’ CEO, Luc Stultjens, “All our manufacturers are international market leaders with…
Read more

TEGAM Introduces New Helicopter Bond Meter

TEGAM Introduces New Helicopter Bond Meter Compact Instrument is configured as a complete kit for bond measurements The TEGAM Model R1L-BR1 bond meter is a purpose built, rechargeable battery powered portable instrument for ground bond measurements. The R1L-BR1 comes with BCP-10 Kelvin Probes and KAK-1M Kelvin Alligator Klips, all housed within a ruggedized case for…
Read more

TEGAM Model R1L-E2A Ground Bond Meter Is Intrinsically Safe

Tester can be used in potentially explosive work areas and will not ignite hazardous materials such as aviation fuel and natural gas. The TEGAM Model R1L-E2A Ground Bond Meter is unique in that it not only provides accurate low-resistance measurements, but is also intrinsically safe. This makes the TEGAM Model R1L-E2A useful in applications not…
Read more

Microwave Power Measurement Fundamentals and Practice Workshop

LINTHICUM HTS. OR POTOMAC, MD You are invited to share a day of learning with TEGAM’s expert engineer Charlie Sperraza. This one day invitation only event will focus on expanding your knowledge base regarding: RF power transfer between two coupled ports. Using reflection coefficients to calculate power transfer and port match. The importance of vector…
Read more

TEGAM Voltmeter Case Sports Safety Features

Contains no metal, making it safer around energized conductors TEGAM has begun offering its line of safety voltmeters with a new Cordura Nylon Carrying Case to improve worker safety. TEGAM’s Models 110A, 122 and 125 Safety Voltmeters will feature the Model 1204A case, which has several features that help users make safer measurements: No metal…
Read more

TEGAM Accessory Improves Handling of SMT Components

Tweezers allow for sorting and resistance measurements without changing probes TEGAM introduces the Model 17510A Chip Tweezers accessory, designed to work with the TEGAM 1750 and 1740 resistance measurement instruments. They enable technicians and inspectors to easily handle very small resistors and make four-wire resistance measurements. The tweezers enable accurate one-handed measurements from micro-ohms to…
Read more

New High Performance Resistance Measurement Instrument Released

TEGAM 1740 Milliohm Resistance Meter Makes Accurate Measurements Fast Resistance meter doesn't force users to choose between accuracy and speed The TEGAM 1740 Milliohm Resistance Meter offers a powerful combination of accuracy and speed performance. In Fast Mode, the 1740 can make 100 readings per second with an accuracy of 0.05%. The combination of accuracy…
Read more

TEGAM Releases Battery Powered Microohmmeter

TEGAM, Inc. has expanded its line of microohmmeters with the development of the Model 1750/BAT. Based on the design of the highly successful Model 1750, the battery-powered version fills a need in the aerospace industry to replace the discontinued Keithley 580 for testing electrical and mechanical bonds. Aerospace industry professionals evaluated many alternatives and concluded…
Read more

TEGAM to Host RF Power Sensor Calibration User’s Group

TEGAM, Inc. is a known leader in the field of RF Power Sensor Calibration. Now, TEGAM is inviting Calibration professionals to learn, test and discuss RF Power Sensor Calibration in a uniquely designed User’s Group. Being held August 1, 2012 in Sacramento, the group will meet for a full day at the Sheraton Grand Sacramento…
Read more

2012 Trade Shows for TEGAM, Inc.

February 28, 2012 PowerTest Fort Worth, Texas Booth #108 March 21-23, 2012 Measurement Science Conference Anaheim, California Booth #4 April 3-5, 2012 Aviation Week MRO Dallas, Texas Booth #3307 May 5-8, 2012 Microwave Wireless Industry Exhibition Shenzhen, China June 24-26, 2012 Electrical Apparatus Service Association Nashville, Tennessee July 1-6, 2012 Conference on Precision Electromagnetic Measurements…
Read more

Follow TEGAM on Twitter

More and more people and companies are using social networking to stay in touch. TEGAM is now tweeting on Twitter! Follow us for information on Trade Shows, Product Releases and fun engineering humor.
Read more

TEGAM Featured in Best of the County Video

This video was prepared for the 2011 Best of the County Awards hosted annually by Growth Partnership for Ashtabula County. TEGAM is honored to be featured in the video and continues to support local economic growth. https://youtu.be/Pf-D7GvrtKc
Read more

TEGAM Offers $1000 Credit with HP432 Trade-in Program

TEGAM, Inc. is offering a $1,000 Trade-In Credit for any HP432 Power Meter toward the purchase of a New TEGAM Model 1830A RF Power Meter! The 1830A (NSN 6625015667703) is a direct reading RF Thermistor Power Meter intended for applications where the lowest uncertainty measurement is important which include metrology, research, and production testing of…
Read more

Technical Communities & TEGAM Sign Government Services Partnership

Technical Communities, Inc., the company technical organizations who sell to the government rely on for proven go-to-market solutions to grow sales, lower costs and reduce risks, today announced a new government services partnership agreement with TEGAM, Inc., an internationally recognized developer of RF measurement and calibration systems. The partnership agreement authorizes Technical Communities to distribute…
Read more

TEGAM Achieves ATEX Approval Certificate

TEGAM, Inc. has received a Product Quality Assurance Notification (PQAN) from UL Demko under Annex VII of Directive 94/9/EC (ATEX) of the European Parliament. This notification is documentation of TEGAM’s capability to manufacture products for application in potentially hazardous environments under an approved Quality System. TEGAM pursued this PQAN as part of its plan to…
Read more

2011 Trade Shows for TEGAM, Inc.

February 22, 2011 PowerTest Washington DC Booth #59 March 16-18, 2011 Measurement Science Conference Pasadena, California Booth #39 April 12-14, 2011 Aviation Week MRO Miami Beach, Florida Booth #544 June 26-28, 2011 Electrical Apparatus Service Association Denver, Colorado Booth #934 August 21-24, 2011 NCSL International Conference & Symposium Baltimore, Maryland Booth #326 November 1-4, 2011…
Read more

TEGAM Announces New Partnership with Dan-el in Israel

TEGAM, Inc. is pleased to announce the addition of Dan-el Technologies Ltd. as their exclusive distributor in Israel. TEGAM’s extensive line of products is complemented by Dan-el’s other manufacturers including Keithley, Maury Microwave and IET Labs. According to Mr. Yossi Keren of Dan-el, “Many of the customers in our extensive database are involved in RF…
Read more

TEGAM Acquires Product Lines from PPM Instruments

TEGAM, Inc. is pleased to announce that they have reached a formal agreement with PPM Instruments which grants TEGAM an exclusive license to manufacture, market, and service their instrumentation products starting 1 August, 2010. After this date, TEGAM will become the sole manufacturer of PPM’s resistance measuring equipment, laboratory nanovoltmeters, signal sources, and signal conditioners.…
Read more

TEGAM Opens Office in China

TEGAM Inc., which designs, manufactures and supports a wide variety of electronic test, measurement and calibration instruments, is pleased to announce it has opened a new National Sales Office in Beijing, China. The strategic location of the office and the addition of key staff will enable TEGAM to better serve its existing customers in China.…
Read more

2010 Trade Shows for TEGAM, Inc.

March 22-26, 2010 Measurement Science Conference Pasadena, California June 13-18, 2010 Conference on Precision Electromagnetic Measurement DCC, Daejeon, Korea July 25-29, 2010 NCSL International Conference & Symposium Providence, Rhode Island September 26-October 1, 2010 European Microwave Week Paris, France
Read more

TEGAM Voltmeter Obtains C-UL-US Certification

TEGAM Inc., which designs, manufactures and supports a wide variety of test, measurement and calibration instruments, is pleased to announce the C-UL-US certification of the Model 110A Safety Voltmeter. Underwriters Laboratories (UL) is the trusted resource across the globe for product safety certification and compliance solutions. The C-UL-US Mark is applied to products for the…
Read more

TEGAM Student Challenge Winner Announced

TEGAM is pleased to announce and congratulate the Winner of the 2009 Student Research Challenge, Wei Wu, of Northwestern University. Mr. Wu submitted an application synopsis of his use of the TEGAM Model 2350, Dual Channel High Voltage Precision Power Amplifier. Mr. Wu’s research project was “Electrically Tunable Quantum Dot Intersubband Devicves”. Quantum dot intersubband…
Read more

Cash Prizes for Students from TEGAM

TEGAM is announcing the 2009 Student Research Challenge. We want to learn more about how people use our products and are willing to reward examples of TEGAM instruments used in research and education. See that attached instructions for submitting your entry. This contest is open to any graduate or undergraduate student who is using TEGAM…
Read more

Contract Announcement – TEGAM Model 1830A

Three branches of the United States Military have purchased the new TEGAM Model 1830A in the first month of its release and awarded it a national stock number (NSN) 6625015667703. The largest contract, from the U.S. Army, is for a period of one year and 168 units, totaling more than one-million dollars. Additionally, orders have…
Read more

NEW RF Power Meter now Shipping

TEGAM, Inc today announces the first shipments of the 1830A. The 1830A is a new RF Thermistor Power Meter intended for applications where the lowest uncertainty measurement is important. These include metrology, research, and production testing of RF equipment. “Until the availability of the 1830A, low uncertainty RF power measurements were made with a collection…
Read more

Upcoming Trade Shows for TEGAM, Inc.

June 17-19, 2008 IEEE MTT-S International Microwave Symposium Atlanta, Georgia Booth 600 August 3-7, 2008 NCSL International Conference & Symposium Orlando, Florida Booths 502 & 504 August 5-7, 2008 NI Week Austin, Texas Booth 203 September 8-11 Autotestcon Salt Lake City, Utah Booth 130 March 25-27, 2009 Measurement Science Conference Anaheim, California Booth 45
Read more

TEGAM, Inc. Redesigns 2008 Catalog

TEGAM, Inc. has completed a major renovation of its 2008 Product Catalog. The initiative behind the redesign was to make the catalog more engaging and more compact. The 2008 catalog has been reduced to 16-pages and all current products are highlighted. The new format will allow TEGAM to update the catalog more frequently, giving customers…
Read more

TEGAM, Inc. Joins LXI Consortium

TEGAM recently joined the LXI Consortium as an Informational Member. LXI (LAN eXtensions for Instrumentation) puts the power of Ethernet to work for test and measurement engineers by improving the modularity, flexibility and performance. Its compact package, high-speed I/O and reliable measurements meet the needs of R&D and manufacturing engineers in many electronic market segments.…
Read more

TEGAM Launches 50 MHz PXI Instrumentation Amplifier

TEGAM, Inc. just released its first PXI product, with the launch of the Model 4040A 50MHz PXI Instrumentation Amplifier. Designed to expand the measurement range of PXI digitizers and analog inputs, the Model 4040A offers 100V differential inputs with 70dB of CMRR. The bandwidth ranges from DC-50 MHz with programmable gain, attenuation, offset and filters.…
Read more

Governor Honors TEGAM, Inc. For Superior Exporting

Governor Ted Strickland recognized 31 Ohio businesses for outstanding contributions to exporting with the 2007 Governor’s Excellence in Exporting Award at an awards ceremony at the Statehouse Atrium. Among the winners was TEGAM, Inc located in Geneva (Ashtabula County). Since 1985 the E-Awards program has recognized companies and organizations of all sizes that have demonstrated…
Read more

TEGAM, Inc. Participates in Business Mission To South Africa

The Ohio Department of Development's International Trade Division participated in a business mission to South Africa from February 19 – 23, 2007. The mission, hosted by the Council of Great Lakes Governors (CGLG) included stops in Johannesburg, Durban and Cape Town. Trade mission participants included representatives from: The Edison Welding Institute, Columbus; Treeman Industries, Boardman;…
Read more

TEGAM, Inc. Sells Resistance Products to IET Labs Inc.

TEGAM, Inc. is pleased to announce that IET Labs Inc. has acquired certain resistance products from TEGAM, effective 01/12/06. IET Labs Inc. offers a complete, A2LA accredited calibration laboratory, service center already experienced with TEGAM and ESI products, and a wide range of complementary resistance, inductance, and capacitance standards. Both companies are working to make…
Read more

TEGAM Receives Hubzone Certification from U.S. Small Business Administration

TEGAM, Inc. is pleased to announce that it has been certified as a qualified HUBZone small business concern by the U.S. Small Business Administration (SBA). The SBA’s HUBZone Empowerment Contracting Program seeks to create jobs and stimulate economic development in urban and rural communities that have been designated as Historically Underutilized Business Zones. Certification is…
Read more

Dynamic Technology to Provide Service and Repair for TEGAM/Tektronix MTI Instruments

TEGAM, Inc. has recently entered into a maintenance agreement with Dynamic Technology, Inc. (DTI) in Cleveland, Ohio. Beginning April 25, 2005, DTI will perform all repair and calibration services to the Tektronix Modular Test Instruments line. These products include: 15030901 DC503A OCS2500/DP SI5010 15031001 DM511 PG502 TG501A 15061101 DM5110 PG506A TM5003 15235001 FG5010 PS5004 TM5006A…
Read more