(2375) MEMS Driver Amplifier, Four-channel, 0-150 V

SKU: 2375
Datasheet

Product Description

MEMS Driver Amplifier

Four Channel

0-150V

The Model 2375 Four-Channel MEMS Engine Driver Amplifier has two modes of operation: normal (splitter bypass) mode and splitter mode. Each of its four channels is rated for 20 mA continuous current with 0.2 Ω output impedance. The 2375 can drive capacitive loads up to 200 pF while maintaining a full power bandwidth, exceeding 5 kHz. The outputs are short circuit protected.

Each channel has an independent voltage monitor output for applications that require a low level representation of the output signal in a closed loop system. The buffers produce a reduction of 100:1 of the output voltage for measurement devices with a 1 MΩ or higher input impedance.

Technical Specifications

  • Output Voltage: -7 to +150 V
  • Output Current: 20 mA
  • Bandwidth: DC to 5 kHz
  • Slew Rate: >5 V/µs
  • Channels: 4
  • Independent monitor output
  • Compatible with most waveform generators
  • Product Forum
  • 1 year warranty
  • Made in USA

Product Documents

Datasheets

Manuals

Additional information

Weight 16 lbs
Dimensions 20 × 14 × 10 in
If you desire to have your shipment outside of North America, please contact customer service at 1-800-666-1010 or tegamsales@aei.com

You may also like…